A Low Weald parish village
Fuse Box Replacement in Rusper
Rusper is a village in Horsham district, close to the Surrey border and west of Crawley. Older village houses are often extended more than once, leaving a main board plus extra units dotted around the property. We replace and combine them at a fixed price.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
What we do in Rusper
Fuse box services for Rusper
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes
Our standard installationFull RCBO board with surge protection
Village houses
Rusper homes, old and newer
The parish church of St Mary Magdalene stands at the heart of Rusper, and the village housing runs from period cottages and older farmhouses to later twentieth century homes. Older properties in a village like this rarely keep their original electrics: they are rewired, extended and modernised in steps, sometimes decades apart and by different electricians.
That is why we test the whole installation, not just the board we are replacing. You get a clear picture of which circuits are sound and which are not, before we commit to a price for anything beyond the board itself.
- Period cottages and farmhouses
- Later village homes
- Whole installation tested
- Findings explained before extra work
Specified for RusperOne board, not three
One board, not three
Combining several consumer units
An extension, a garage conversion and a new kitchen can each arrive with a small consumer unit of its own. The result is a house with two or three boards, sometimes fed from one another, with unclear labelling and protection that does not fully coordinate. It works until something trips and no one knows which switch to reset.
Where practical, those circuits come back onto one new board with enough ways, which often means a 12 way high integrity unit at £575, or RCBO protection across 10 to 12 ways for £695. If a separate board has to stay, for an outbuilding perhaps, we make sure it is fed and protected properly.
- Extra boards traced and tested
- High integrity 12 way £575
- RCBO 10 to 12 way £695
- Clear labels on every way
Getting to you
Travelling to Rusper
We come up the A23, through the west of Crawley and out along the country roads to the village, and the journey is not added to your bill. To price the whole job, we need to see each board plus the meter in the photos you text. Urgent faults should be phoned in, and we aim to reach the village the same day.
Rusper at a glance
- ParishRusper
- CouncilHorsham District Council
- PostcodeRH12
- Nearest townCrawley, 6.6 km to the east
- What we often findMore than one board
How long does it take?
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Pricing guide
Fixed prices in Rusper
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Most popular
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
Surge protection retrofit £165
Relocation with a new board add £250
Standalone relocation £395
EICR with any board £99
Standalone EICR £175 to £350
No travel charge to Rusper. Full breakdown on the pricing page.
Rusper questions
Asked in Rusper
Still not sure?
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691Not always. If it is in good condition, correctly fed and properly protected, it can stay. If it is old or has been fed from a socket circuit, it should be changed or its circuits brought back to the main board. We test it either way and tell you which applies before quoting for anything beyond the main board.
For a straight board replacement, normally not. We reconnect the existing circuits to the new unit in the same position. Combining several boards can mean running a new cable between them, which we route through existing voids, cupboards or the loft wherever possible, and we explain beforehand if any making good will be needed.
A new board cannot stop interruptions on the network, which are for UK Power Networks to deal with, and you can report them by calling 105. What it does add is Type 2 surge protection, which helps limit damage to electronics from the voltage spikes that can come with faults and lightning on overhead lines.
Nearby
Also covering places near Rusper
Ready when you are
Book your Rusper fuse box replacement
Every fuse board in your Rusper home belongs in the pictures you send to 0333 360 8691, so the price can cover merging them into a single tested, certified unit.
- Call, 8am to 8pm0333 360 8691
- CoverageRusper: RH12