
Fuse Box Replacement in Rake
Rake is a village near the line between West Sussex and Hampshire, north west of Midhurst, with a Liss postcode. Old fuse boxes and first generation consumer units in Rake homes are swapped at fixed prices, surge protection is fitted as standard, and everything is certified within 48 hours.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
Fuse box services for Rake
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes

Roadside houses and homes in the woods
Much of Rake lies along the B2070, the road that carried A3 traffic before the bypasses were built, with lanes leading off into the surrounding woods. That gives a mix of older roadside properties and twentieth century houses in their own plots, so there is no single type of board we expect. Some homes still have fuse boxes; others have early plastic consumer units.
Plastic units were the norm for years, but current regulations ask for consumer units in homes to be housed in non combustible enclosures. The boards we fit are all metal clad, have Type 2 surge protection built in and give either dual RCD or full RCBO protection, and we price them from your photos.
- Fuse boxes and early plastic units replaced
- Metal clad consumer units
- Dual RCD from £425
- Full RCBO from £625

Living on the county line
Rake sits close to the boundary between West Sussex and Hampshire, so homes nearby can come under different councils. For a fuse box replacement the work is identical either side: the same regulations, the same testing and the same notification to the local Building Control department under Part P. The only difference is which authority receives it.
Homes in Rake are charged our standard fixed prices, the drive adds nothing to them, and we email your Electrical Installation Certificate within 48 hours. If you are not sure which council your home comes under, your council tax bill will say, and we make the Part P notification to match.
- Standard fixed prices
- Notification to the correct authority
- Certificate emailed within 48 hours
- No travel charge
Getting out to Rake
Rake ranks among the more distant villages we serve from Brighton. We come across on the A272 through Midhurst and Rogate, or up the A3 when traffic favours it. Most board changes are booked ahead from a photo quote, and for urgent faults we answer the phone and will say straight away whether we can reach you that day.
Rake at a glance
- ParishLiss
- CouncilChichester District Council
- PostcodeGU33
- Nearest townMidhurst, 10.4 km south east
- LocationNear the Hampshire boundary
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Fixed prices in Rake
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
No travel charge to Rake. Full breakdown on the pricing page.
Asked in Rake
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691Not automatically. A plastic consumer unit in good condition, with RCD protection, is not unsafe simply because it predates the current rules. But if it has no RCDs, shows signs of heat damage or needs changing for another reason, any replacement must be non combustible. We give you an honest view from your photos.
The power has to be off for much of the job, which typically runs four to six hours. You might choose to work elsewhere that day, or we can agree in advance when the power goes off so you can plan calls around it. Tell us when booking and we will set a start time that suits.
Look for a switch marked RCD, usually with a small test button labelled T. If you only see fuses or circuit breakers and one main switch, there is probably none. Sending us a picture settles it, and we will explain what you have and whether it needs upgrading.
Also covering places near Rake
Book your Rake fuse box replacement
One message to 0333 360 8691, with a picture of the board and the meter, gets your Rake home a fixed price on a new consumer unit. Travel is never added on top.
- Call, 8am to 8pm0333 360 8691
- CoverageRake: GU33