
Fuse Box Replacement in Borden
Easy to confuse with Bordon over the border in Hampshire, this Borden is the small Milland parish hamlet north west of Midhurst. For homes here, an old fuse box is swapped at a fixed price, the whole property is tested and the supply side gets a careful look as well.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
Fuse box services for Borden
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes

What sits between the meter and the board
In a small rural hamlet like Borden, the equipment at the supply end can be as old as the fuse box itself. Alongside the board, we look at the cut out where the network cable arrives, the meter tails, and whether there is an isolator switch. Older cut outs can be cracked or show signs of overheating, and tails may be undersized for what the house uses now.
The cut out belongs to UK Power Networks, so we never open it, but we point out any concern and help you report it. The tails from the meter to the board are part of your installation, and we renew them where needed so the new board is fed properly.
- Cut out condition checked
- Meter tails sized for the load
- Concerns passed to UK Power Networks
- Dual RCD from £425, RCBO from £625

One letter different, and in another county
Borden in Milland parish sounds just like Bordon, the Hampshire town a few miles to the north, and shares its spelling with a Borden in Kent. It is an easy mix up. When you book with us, the parish, the postcode and a house name are all we need, and we cover this Borden as part of West Sussex, with no travel charge.
Out here, a little extra detail helps: whether there is a gate code, where to park, and whether the board is in the house or an outbuilding. It means we arrive on time with the right board, ready to start straight away. Most boards are fitted in four to six hours.
- Milland parish, Chichester District
- GU30 and GU31 addresses
- House names and access notes welcome
- Same fixed prices across Sussex
Travelling out to Borden
Borden lies out beyond Midhurst, towards the Hampshire border. We usually take the A272 to Midhurst and continue into Milland parish from there, at no extra cost. An agreed price follows once we have seen your board and meter in a couple of pictures. Ring us about an emergency such as scorching at the board and it jumps the queue, with the aim of getting to you the same day.
Borden at a glance
- ParishMilland
- CouncilChichester District Council
- PostcodesGU30 and GU31
- Nearest townMidhurst, 6.8 km south east
- Not to be confused withBordon, Hampshire
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Fixed prices in Borden
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
No travel charge to Borden. Full breakdown on the pricing page.
Asked in Borden
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691That is the cut out, which belongs to UK Power Networks, so only they can repair or replace it. If you notice damage, scorching or a burning smell, call 105, the national number for power cuts and network safety. We check the cut out during every board change and tell you if anything there needs their attention.
It is not compulsory, but an isolator between the meter and the board makes future work much easier, because the supply can be switched off without the network operator removing the main fuse. If one would help in your case, we say so when quoting. Some meter positions already have one, and a photo will show us.
Not always. If your tails are the right size, in good condition and properly secured, they can stay. Older tails are sometimes thinner than the 25mm² size now usual for a modern home. We check them on every visit and replace them where needed, so the connection to the new board is sound.
Also covering places near Borden
Book your Borden fuse box replacement
So we know it is the Milland Borden, mention the parish in your message to 0333 360 8691 along with a shot of the board and one of the meter, and a fixed price will follow.
- Call, 8am to 8pm0333 360 8691
- CoverageBorden: GU30, GU31