Liphook postcode, Sussex parish
Fuse Box Replacement in Milland
Milland is a rural village and parish in the far north west of West Sussex, within reach of Midhurst, with Liphook as its post town. Outdated fuse boxes in the parish are replaced at fixed prices, and boards that also have to handle electric heating are familiar work for us.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
What we do in Milland
Fuse box services for Milland
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes
Our standard installationFull RCBO board with surge protection
Rural homes, varied boards
Village houses with a lot asked of them
Homes around Milland range from older cottages and farmhouses to later houses set along its lanes, and few were wired with today's loads in mind. Electric showers, induction hobs, home offices and outbuildings all draw on a board that may have been fitted decades ago, sometimes with an extra unit bolted on when the main one ran out of space.
We replace the whole lot with one consumer unit sized for the way you live now, leaving spare ways where you might add circuits later. Many family homes suit a full RCBO board of 10 to 12 ways at £695, and your photos tell us which size to recommend.
- One board in place of several
- Spare ways for future circuits
- Showers and hobs on their own protection
- Board size chosen from your photos
Specified for MillandHeating without mains gas
Heating without mains gas
Storage heaters, oil and the move to heat pumps
Many rural homes in this part of Sussex have no mains gas, so heating comes from oil, LPG or electricity. Where storage heaters run on Economy 7 or a similar two rate meter, there is often a second board or a separate set of fuses for the off peak circuits, sometimes with timers and contactors added over the years.
We can bring the off peak circuits into a modern arrangement with proper protection and clear labelling. If you plan to replace oil or storage heaters with a heat pump, we make sure the new board has a suitable way ready for it and check whether your supply may need upgrading by UK Power Networks.
- Off peak circuits made safe and labelled
- Old timers and contactors checked
- Boards ready for a heat pump
- Supply upgrade advice
Getting to you
Booking an electrician in Milland
Milland sits up in the far north west of West Sussex. We usually travel via the A272 and Midhurst, then north west on the lanes. Photos come first, then the fixed price is agreed and you pick the date. If the power has gone or the board keeps tripping, phone us and we will make every effort to come out that day.
Milland at a glance
- ParishMilland
- CouncilChichester District Council
- PostcodeGU30
- Nearest townMidhurst, 7.4 km south east
- Heating we often seeOil, LPG or electric
How long does it take?
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Pricing guide
Fixed prices in Milland
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Most popular
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
Surge protection retrofit £165
Relocation with a new board add £250
Standalone relocation £395
EICR with any board £99
Standalone EICR £175 to £350
No travel charge to Milland. Full breakdown on the pricing page.
Milland questions
Asked in Milland
Still not sure?
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691Often, yes. It depends on how the two rate meter is wired and whether your tariff still needs separate switching. We look at the meter, any timers and the existing boards, then recommend either one combined consumer unit or a tidy new pair. Either way, every circuit ends up properly protected and clearly labelled.
Ask the installer what supply and circuit the heat pump needs, then check your board can provide it. An old fuse box, or a consumer unit with no free ways, will usually need replacing first. We can fit a board with the right protected way ready, test the earthing, and tell you if the main fuse looks too small for the extra load.
Yes. Small additions such as an outdoor socket, a supply to a shed or a new circuit for an electric shower can usually be done on the same visit, priced separately and agreed in advance. Doing them alongside the board change saves a second visit and a second day with the power off.
Nearby
Also covering places near Milland
Ready when you are
Book your Milland fuse box replacement
Pricing your Milland home starts with a text on 0333 360 8691: a picture of the board, plus any off peak meter or timers.
- Call, 8am to 8pm0333 360 8691
- CoverageMilland: GU30