Between the shingle and the Levels
Fuse Box Replacement in Pevensey Bay
Pevensey Bay strings out along the shingle north east of Eastbourne, with the flat Pevensey Levels behind it. We replace fuse boxes in its bungalows, chalets and seafront houses with modern consumer units, and we think about where a board is best placed on such low ground.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
What we do in Pevensey Bay
Fuse box services for Pevensey Bay
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes
Our standard installationFull RCBO board with surge protection
Bungalows by the beach
Single storey living on the shingle bank
Much of Pevensey Bay is single storey: bungalows and chalet bungalows along the coast road and the roads behind it, with houses facing straight onto the beach. Some began as seaside holiday places before becoming year round homes. In a bungalow the board is often in a hall cupboard or by the front door, sometimes quite low down.
Bungalows are usually straightforward to work in, because the loft gives an easy route for cables. That makes moving a board to a better position far less disruptive than in a house with two floors. Prices begin at £425 for dual RCD and £625 for full RCBO, with surge protection part of both.
- Hall cupboard boards replaced
- Loft cable routes used
- Dual RCD from £425
- Full RCBO from £625
Specified for Pevensey BayLow ground, high water
Low ground, high water
Placing a board with flooding in mind
Pevensey Bay sits on low land between the sea and the Levels, protected by its shingle bank. Where flood risk is a real concern, it makes little sense to put a brand new consumer unit at skirting height. Guidance on flood resilient homes recommends keeping the board, meter and sockets above the likely flood level where that is practical.
If your home has taken on water in the past, tell us when you send photos. Water that reached sockets or back boxes can leave damage that is not visible, and our testing is designed to find it. Adding a full EICR to the board change costs £99.
- Board height reviewed
- Flood history taken into account
- Hidden water damage tested for
- EICR £99 alongside a board
Getting to you
Getting out to Pevensey Bay
From Brighton & Hove we head east on the A27 past Lewes and Polegate to Pevensey, then down to the coast. Send photos by text and you can have a fixed price along with dates to pick from. A board that has failed or smells of burning is different: switch off at the main switch if it is safe, then phone us. Our aim then is a same day visit.
Pevensey Bay at a glance
- ParishPevensey
- CouncilWealden District Council
- PostcodeBN24
- Nearest townEastbourne, 6.5 km south west
- Watch forLow lying ground and board height
How long does it take?
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Pricing guide
Fixed prices in Pevensey Bay
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Most popular
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
Surge protection retrofit £165
Relocation with a new board add £250
Standalone relocation £395
EICR with any board £99
Standalone EICR £175 to £350
No travel charge to Pevensey Bay. Full breakdown on the pricing page.
Pevensey Bay questions
Asked in Pevensey Bay
Still not sure?
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691Yes. Moving the board during a replacement adds £250 to the board price. We extend the circuits to the new position, fit the consumer unit there and test everything. The meter and incoming cable belong to your supplier and UK Power Networks, so if those need raising we will tell you who to contact.
Yes: Brighton & Hove is our base, and from there we cover the whole of Sussex. The journey is on us, so a Pevensey Bay board costs the same as one in Brighton, starting at £425. Because the journey is a long one, we load the van for your particular job from your photos, so it can be finished in one visit.
The whole property. Every board change includes inspection and testing of all the circuits it supplies, because a new consumer unit is only as safe as the wiring behind it. Those results are recorded on your Electrical Installation Certificate, which is emailed to you no later than 48 hours afterwards, and we notify Building Control of the work under Part P.
Nearby
Also covering places near Pevensey Bay
Ready when you are
Book your Pevensey Bay fuse box replacement
Whether your home faces the beach or looks towards the Levels, pictures of the board sent through to 0333 360 8691 are enough for us to fix the price.
- Call, 8am to 8pm0333 360 8691
- CoveragePevensey Bay: BN24