Beneath the castle mound
Fuse Box Replacement in Bramber
Bramber runs along The Street at the foot of its Norman castle mound, barely a kilometre from Steyning and across the River Adur from Upper Beeding. Old cottages and later houses get the same treatment when their fuse box is upgraded: a fixed price, surge protection on the new board and every job fully tested.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
What we do in Bramber
Fuse box services for Bramber
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes
Our standard installationFull RCBO board with surge protection
Old Street, newer roads
From timber frames to twentieth century semis
Bramber's oldest homes line The Street, where centuries old timber framing and brick sit close together, alongside houses built during the last century. That spread means almost any kind of board can turn up here, from a cast iron switch and fuse in a cupboard to a 1990s plastic unit with a single RCD covering every circuit, which can leave the whole house dark after one small fault.
Old single RCD boards are a common cause of nuisance tripping. A full RCBO board gives each circuit its own protection, so a faulty kettle no longer takes the freezer and the lights with it. For most homes here an 8 way RCBO board from £625 is a sensible choice, or larger where a kitchen extension has added circuits.
- Single RCD boards replaced
- Each circuit on its own RCBO
- Old cast iron switchgear removed
- Every circuit tested and recorded
Specified for BramberListed buildings, conservation care
Listed buildings, conservation care
Working gently in Bramber's historic core
St Mary's House and the castle ruins give Bramber its character, and a number of the older buildings in the village are listed. A straight swap in the same position rarely touches historic fabric, but where new cable routes are needed through old timber, lath and plaster or past exposed beams, we plan them with you first and you can check with Horsham District Council if consent might apply.
We use surface trunking or existing voids rather than chasing old walls wherever possible, and we photograph the position of the old board so any making good can be matched. Your Electrical Installation Certificate and the Building Control notification under Part P are handled for you.
- Routes planned around beams and lath
- Minimal chasing of historic walls
- Building Control notified for you
- Certificate within 48 hours
Getting to you
From Brighton & Hove to Bramber
With Steyning just up the road, Bramber is reached by the A27 to Shoreham and then the A283 through the gap the Adur cuts in the Downs. A fixed quote follows your texted board photos, and you then choose whichever day suits. When the power keeps tripping, ring us, and we aim to be in Bramber before the day is out.
Bramber at a glance
- ParishBramber
- Local councilHorsham District Council
- Postcode districtBN44
- Next door toSteyning, 1.1 km
- Typical homesPeriod cottages and 20th century houses
How long does it take?
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Pricing guide
Fixed prices in Bramber
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Most popular
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
Surge protection retrofit £165
Relocation with a new board add £250
Standalone relocation £395
EICR with any board £99
Standalone EICR £175 to £350
No travel charge to Bramber. Full breakdown on the pricing page.
Bramber questions
Asked in Bramber
Still not sure?
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691It should not. The new board normally goes where the old one was, and modern consumer units are compact. If you would rather it was out of sight, we can talk about a cupboard position, and relocation with a new board adds £250. We avoid altering historic fabric and will tell you if anything ought to be checked with the council first.
Older split load boards put several circuits behind one RCD, so a small earth leakage on any of them switches the lot off. Damp, a tired appliance or an outdoor socket are typical causes. A full RCBO board isolates only the faulty circuit, and our testing usually pinpoints where the leakage is coming from.
The supply is off for most of the time the board is being changed, typically 4 to 6 hours for a standard home. We agree a start time with you, leave fridges and freezers until last where possible, and restore power as soon as each circuit has passed its tests.
Nearby
Also covering places near Bramber
Ready when you are
Book your Bramber fuse box replacement
Listed, period or modern, every Bramber home is priced from its board photos at a fixed figure, and those photos go to 0333 360 8691 as a text.
- Call, 8am to 8pm0333 360 8691
- CoverageBramber: BN44