Riverside lane south of Bramber

Fuse Box Replacement in Annington

Just south of Bramber, where farmland runs between the River Adur and the rising downland, lies the small hamlet of Annington, south east of Steyning. Here, each old fuse box we take out is replaced at a fixed price by a board carrying Type 2 surge protection, with the whole property tested before we leave.

  • Part P registered installers
  • Fitted and certified in a day
  • Surge protection as standard
  • Fixed prices, no surprises
  • 17+ YearsEst. 2009 in Brighton & Hove
  • 6 Year GuaranteeWorkmanship, every board
  • Specialist TeamDirectly employed installers
  • Free QuotationSurvey or photo, no call out fee
  • 2,400+Boards replaced since 2009
What we do in Annington

Fuse box services for Annington

Full RCBO consumer unit with surge protection, neatly wired and labelled in a Sussex home
Our standard installationFull RCBO board with surge protection
Cottages and farm homes

Few houses, long wiring histories

A hamlet of this size has no estates and no rows of matching houses. Homes in small Adur valley settlements like this tend to be older cottages and farm properties, each rewired, extended or patched at different times. It is common to find an original fuse box sitting beside a newer add-on unit fed for a kitchen, a shower or an outbuilding, with circuits nobody has traced in years.

Before any work starts we identify every circuit, including cables that leave the house for a garage, store or workshop. All of it ends up on one modern board with RCD or RCBO protection, clearly labelled and covered by an Electrical Installation Certificate that we email no later than 48 hours afterwards.

  • Add-on units merged into one board
  • Every circuit traced and labelled
  • Outbuilding supplies protected
  • Certificate sent by email in 48 hours
Large distribution board being installed with cable tray and busbar, levelled and ready for termination
Specified for AnningtonLiving by the River Adur
Living by the River Adur

Siting a board on low ground

Annington sits down on the floor of the Adur valley, and the land beside the river is low lying. Where a home is near ground that can hold water, the height of the consumer unit is worth thinking about. A board fixed low in a hallway or outbuilding is more exposed than one mounted higher up a wall, and moving it is easiest while the old one is coming out anyway.

If you want the new board higher or in a different room, a relocation alongside the replacement adds £250. We also look at the route the meter tails take and talk through what, if anything, UK Power Networks or your energy supplier would need to move before you commit.

  • Board height reviewed on every visit
  • Relocation with new board adds £250
  • Meter tails checked and replaced
  • Advice on what the network must move
Getting to you

Reaching Annington from the coast

Getting here is a straightforward run: west from Brighton & Hove on the A27 to Shoreham, then up the Adur valley on the A283 towards Bramber. Once your photos of the fuse board and meter have arrived, we fix the quote and you choose the day. Should you have a fault, ring us and we will do what we can to get to Annington that day.

Annington at a glance

  • ParishBramber
  • CouncilHorsham District Council
  • PostcodeBN44
  • Nearest townSteyning, 1.3 km away
  • SettingSmall hamlet in the Adur valley
How long does it take?

A new consumer unit, fitted in a day

  1. 01
    The first hour

    Protect, isolate, strip out

  2. 02
    Hours two to four

    Fit and terminate the new board

  3. 03
    Hour five

    Test every single circuit

  4. 04
    The final hour

    Energise, label, walk through

Not sure how many ways your board needs?

Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.

Send a photo
Pricing guide

Fixed prices in Annington

Dual RCD board

6 way, from£425
  • Ideal for 1 to 2 bed flats
  • 10 way from £495
  • Surge protection included
Get a quote

High integrity

12 way, from£575
  • 3 to 4 bed houses
  • Critical circuits isolated
  • Surge protection included
Get a quote
Most popular

Full RCBO board

8 way, from£625
  • 10 to 12 way from £695
  • 14 to 16 way from £795
  • Our recommendation
Book a survey

RCBO + AFDD

10 way, from£1,095
  • 14 way from £1,295
  • HMOs & period terraces
  • Selected circuits from £845
Get a quote
Surge protection retrofit £165 Relocation with a new board add £250 Standalone relocation £395 EICR with any board £99 Standalone EICR £175 to £350

No travel charge to Annington. Full breakdown on the pricing page.

Annington questions

Asked in Annington

Still not sure?

Call for a straight answer from an installer, not a call centre.

Call 0333 360 8691

Usually, yes. Raising a board a short distance in the same spot is often simple, and a larger move with a new board adds £250 to the fixed price. We check where the meter and incoming cable sit first, because those belong to the network and your energy supplier and are not ours to move.

An old board with rewireable fuses is not automatically dangerous, but it gives no RCD protection against electric shock, and fuses can be rewired with the wrong rating. Replacing it brings the installation up to the current wiring regulations, BS 7671, and we test every circuit so you know the condition of the wiring behind it.

We explain what we found in plain terms, show you the test readings and give a fixed price for putting it right. Nothing extra is done without your agreement. Many faults found during a board change, such as a borrowed neutral or a damaged cable, can be fixed on the same visit.

Ready when you are

Book your Annington fuse box replacement

Message us on 0333 360 8691 with a photo that captures both meter and fuse box, and a fixed price for the Annington house comes straight back, with nothing added for the journey.

Request a free quote

No obligation, no call out fee. We reply the same day.

Prefer a photo quote? Text a picture of your fuse box to 0333 360 8691.