
Fuse Box Replacement in Linch
The hamlet of Linch gives its name to its own parish north of Midhurst and sits in the GU30 postcode area. Out here a fuse box often protects more than lights and sockets, so we plan each board change around pumps, outbuildings and anything that needs to keep running.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
Fuse box services for Linch
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes

Homes spread between fields and woods
As a hamlet, Linch is made up of scattered properties in their own grounds rather than a village street. That usually means larger plots, longer cable runs and a board feeding things you would not find in a town house, from garage workshops to garden lighting and gates. Each home is different, so we ask a few questions before we quote.
Bigger plots mean longer runs to garages and stores, and those circuits deserve the same scrutiny as the house wiring. Outdoor circuits must have RCD protection. We test every one, and anything tired or damaged is flagged with a fixed price before we go further.
- Long cable runs tested
- Garage and store supplies included
- Gates and garden lighting checked
- Faults priced before repair

Pumps and treatment plants on rural supplies
Homes away from the mains often rely on electricity for their water or drainage: a borehole pump, a booster pump, or a sewage treatment plant with its own blower. If one of those shares a circuit with other loads, a fault elsewhere can quietly switch it off, and you may not notice until an alarm sounds or the taps run dry.
If your home relies on any of these, we test the cable out to the pump or plant, check the isolator beside it and give the circuit its own protection on the new board, clearly labelled. Should the existing cable be damaged or unsuitable, we show you the readings and price the repair before doing anything.
- Pump and plant circuits tested
- Isolators checked
- Critical circuits clearly labelled
- Own protection for each pump
Linch is on our map
Since Linch is a short drive north of Midhurst, we come by the A272 or the A286, whichever suits the day. We quote from your photos and book a date ahead. Lost power to a pump or the whole house? Give us a ring and we will see about getting there the same day.
Linch at a glance
- ParishLinch
- CouncilChichester District Council
- PostcodeGU30
- Nearest townMidhurst, 6.6 km south
- SettingScattered rural properties
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Fixed prices in Linch
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
No travel charge to Linch. Full breakdown on the pricing page.
Asked in Linch
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691Ideally, yes. A dedicated circuit with its own RCBO means a fault on a socket or lighting circuit will not cut your water supply. When we replace the board we can separate the pump if it currently shares a circuit, provided the existing wiring allows, and we quote any extra work before starting.
Clear access to the board and meter, and tell us about anything that must not be without power for long, such as a treatment plant, a chest freezer or medical equipment. We switch off for as short a time as practical, reconnect the most important circuits first and test everything before handing the house back to you.
Yes. Every circuit is traced and labelled in plain words on the new board, such as kitchen sockets or pump house, rather than just numbers. You also receive a schedule of circuits with your Electrical Installation Certificate, so anyone working on the house later can see what each way supplies.
Also covering places near Linch
Book your Linch fuse box replacement
When the board photos go to 0333 360 8691, add a note about any pumps or outbuildings so we can price your Linch job properly first time.
- Call, 8am to 8pm0333 360 8691
- CoverageLinch: GU30