Former airfield village east of Chichester
Fuse Box Replacement in Tangmere
Tangmere sits just off the A27, east of Chichester, and its homes range from older houses of the RAF years to brand new estates. Whichever kind of home is yours, the fuse box swap comes at a fixed price, Type 2 surge protection is built into the new board, and the job ends only once the whole property has been tested.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
What we do in Tangmere
Fuse box services for Tangmere
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes
Our standard installationFull RCBO board with surge protection
Two generations of housing
Tangmere homes, from the airfield era to new build
Much of Tangmere's housing grew up around the old RAF station, so you will find mid twentieth century semis and terraces alongside later estates. Homes of that age have often had their wiring altered piecemeal over the decades, and some still run on an early board with no RCD protection, or a single RCD covering every circuit, so one fault can black out the whole house.
In newer Tangmere homes a modern consumer unit is usually fitted already, and if yours needs nothing doing, you will hear that from us straight. When a change is needed, the choice runs from a dual RCD unit at £425 up to full RCBO protection at £625, which isolates faults circuit by circuit.
- Older semis and terraces upgraded
- Single RCD boards replaced
- Honest advice on newer homes
- Full RCBO boards from £625
Specified for TangmerePlanned growth, bigger loads
Planned growth, bigger loads
Getting Tangmere boards ready for EV chargers and heat pumps
Tangmere has been earmarked for a substantial amount of new housing, and here, as everywhere, more households are adding EV chargers, heat pumps, solar panels and batteries. Each of those needs a spare way, the right type of RCD protection and a board that can take the extra demand. An older unit that was already full ten years ago will not cope without changes.
Tell us what you plan to install over the next few years and we will size the board around it, leaving spare ways rather than squeezing circuits in. Type 2 surge protection comes as standard, a sensible partner for the electronics inside chargers and inverters.
- Spare ways planned in
- EV charger ready boards
- Heat pump circuits allowed for
- Solar and battery friendly
Getting to you
Reaching Tangmere from Brighton & Hove
A straightforward run west along the A27 brings us to Tangmere, putting it among the easier villages in the Chichester area for us to reach. Text us pictures of the board to get a fixed quote, settle on a convenient date, and if the power is lost, phone us for same day help, which we give wherever we can.
Tangmere at a glance
- ParishTangmere
- CouncilChichester District
- PostcodePO20
- Nearest townChichester, 4.6 km west
- Typical homesMid century houses and newer estates
How long does it take?
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Pricing guide
Fixed prices in Tangmere
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Most popular
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
Surge protection retrofit £165
Relocation with a new board add £250
Standalone relocation £395
EICR with any board £99
Standalone EICR £175 to £350
No travel charge to Tangmere. Full breakdown on the pricing page.
Tangmere questions
Asked in Tangmere
Still not sure?
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691Most likely you do not, and we will say so. The usual reason on a newer home is an addition: an EV charger or heat pump needing a spare way or a different RCD type than the original board offers. Send us a photo and details of what you plan to fit, and we can often answer by text. If the board simply lacks surge protection, a retrofit is £165.
Typically a board that has been extended or altered over several decades, sometimes with circuits added by different people. Because we test and inspect the whole property with every board change, any weak spots are found before the new unit is switched on, and we explain each one in plain terms before anything extra is done.
A full RCBO board is our usual recommendation, from £625 for 8 ways or £695 for 10 to 12, because each circuit gets its own protection and spare ways are easy to plan. We check the RCD type your inverter maker specifies and include Type 2 surge protection as standard.
Nearby
Also covering places near Tangmere
Ready when you are
Book your Tangmere fuse box replacement
Text us on 0333 360 8691 with one photo of the board; you will then have a fixed Tangmere price covering surge protection, full testing and your certificate within 48 hours.
- Call, 8am to 8pm0333 360 8691
- CoverageTangmere: PO20