
Fuse Box Replacement in East Hampnett
Tucked into Tangmere parish to the east of Chichester, the small hamlet of East Hampnett is split between two postcode districts, PO18 and PO20. Whichever yours is, the deal is the same: a fixed quote from a photo, and no travel charge.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
Fuse box services for East Hampnett
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes

What we expect to find in East Hampnett houses
East Hampnett is too small to have one style of housing. Homes in rural settlements like this are usually individual: older cottages, farmhouses and detached houses, altered and extended over the years. That tends to mean a fuse box that has gained circuits one at a time, and one that may sit somewhere awkward, such as a porch, cupboard or outbuilding.
If the board is in the wrong place, we can move it while fitting the new one for an extra £250. A dual RCD board is the entry point at £425; where a house runs several outbuilding circuits, a full RCBO board, starting at £625, stops a single fault from tripping everything.
- Altered and extended homes
- Awkwardly placed boards moved
- Relocation with new board £250
- Fixed price from photos

Feeding outbuildings safely from a new East Hampnett board
Rural plots often come with more than the house: a detached garage, a workshop, a stable or a garden office, each fed by a cable from the main board. Those supplies are a common weak point on older installations, with undersized cables, no RCD protection, or doubtful earthing at the far end.
When we replace your board we test every outbuilding circuit too, and give each one a properly rated, RCD protected way of its own. If a submain needs more work, we explain what and why before quoting, so nothing is added without your say.
- Garage and workshop supplies
- Stables and garden offices
- Every outbuilding circuit tested
- Submain issues explained first
How we get to East Hampnett
We set out from Brighton & Hove and come along the A27 past Arundel, so East Hampnett is a direct trip with no need to cross Chichester. Text or ring to book, whichever day suits, and if your house has no power, say so straight away and we will push to get an installer out that day.
East Hampnett at a glance
- ParishTangmere
- DistrictChichester
- PostcodesPO18 and PO20
- Nearest townChichester, 5.8 km west
- Supply we expectRural, often with outbuildings
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Fixed prices in East Hampnett
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
No travel charge to East Hampnett. Full breakdown on the pricing page.
Asked in East Hampnett
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691No. The price follows the board you choose rather than your postcode, and reaching any address in Sussex adds nothing to the bill. Whether you are PO18 or PO20, dual RCD boards start at £425 and full RCBO boards at £625. For an exact figure, send us one picture of the board and another of the meter area.
Yes. We allow a dedicated, correctly rated way for each outbuilding and test the cable that runs to it. If the existing submain is too small for what you now use out there, such as welding gear or a car charger, we tell you before fitting and price any extra work separately.
Text us a clear shot of the fuse box, one of the meter and one wider view showing where it sits. Mention any outbuildings fed from it. From that we can usually give a fixed price, and if anything is unclear we ring you rather than guess.
Also covering places near East Hampnett
Book your East Hampnett fuse box replacement
Snap the East Hampnett fuse box on your phone and text the pictures to 0333 360 8691. You will get a fixed price back, with surge protection and full testing included.
- Call, 8am to 8pm0333 360 8691
- CoverageEast Hampnett: PO18, PO20