
Fuse Box Replacement in Ringmer
Few villages in Lewes district are bigger than Ringmer, and its houses were built over several generations. An old fuse carrier and a worn plastic unit from the 2000s get the same treatment: a new board at an agreed price, surge protection to Type 2 and a test of every circuit in the house.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
Fuse box services for Ringmer
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes

Cottages, estate semis and newer streets
The older part of Ringmer gathers around the village green and the church, with cottages and period houses that have been rewired in stages over the years. Much of the village, though, is twentieth century estate housing: semis, detached family homes and bungalows. Plenty of those still have the board they were built with, or a later replacement that has no RCD protection at all.
A board without RCDs will not cut the power if someone touches a live fault, and that is the main reason to change it. In a typical Ringmer semi or bungalow the job is covered by £425 for a two RCD board or £625 for RCBOs throughout, and the whole house is tested and certified either way.
- Rewireable fuses replaced
- RCD protection on every circuit
- Bungalows and family homes
- Whole house tested and certified

Newer homes, chargers and extensions
Ringmer has gained new housing on its edges in recent years, and plenty of its older homes have been extended. A newer house often arrives with a modern board, but adding an EV charger, an electric shower or a kitchen extension can leave it without spare ways or the right protection. That is when a change, or a careful upgrade, makes sense.
Before quoting, we look at what you already have and what you plan to add. If the existing board is sound and only lacks surge protection, a surge retrofit at £165 may be all you need. If it is full or poorly protected, a larger RCBO board leaves room for the next project.
- Boards ready for an EV charger
- Spare ways planned in
- Surge retrofit £165
- Honest advice if no change is needed
Ringmer call outs and fixed price bookings
Ringmer lies north east of Lewes, and our installers come along the A27, past Lewes on the A26 and out on the B2192. Send us photos of your board and we can quote a set figure. Smoking, buzzing or constant tripping is worth a phone call straight away, as we aim to get to faults like that on the day you ring.
Ringmer at a glance
- ParishRingmer
- CouncilLewes District Council
- PostcodeBN8
- Nearest townLewes, 4.1 km south west
- Typical homesPeriod cottages, estate semis, bungalows, new builds
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Fixed prices in Ringmer
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
No travel charge to Ringmer. Full breakdown on the pricing page.
Asked in Ringmer
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691Not automatically, but it is worth checking. Boards from that era often have rewireable fuses or circuit breakers with no RCD protection, in enclosures that would not meet today's requirement for a non combustible consumer unit. A photo is usually enough for us to give you a straight answer on whether the board should go or whether testing on its own would do.
Yes. We fit the new board with a spare way and the right type of protection for a charger circuit, and we check your main fuse and earthing at the same time. Whoever installs the charger then has a modern, properly protected board to connect to, which keeps their visit shorter and simpler.
A typical board change runs to between four and six hours, with the supply switched off for much of it. We keep the off period as short as we can, test every circuit before switching back on and label the new board clearly. A fridge and freezer will normally be fine if the doors stay shut.
Also covering places near Ringmer
Book your Ringmer fuse box replacement
If you message a shot of the fuse box through to 0333 360 8691, the Ringmer price that comes back is fixed. Travel is free, and the certificate reaches your inbox within 48 hours.
- Call, 8am to 8pm0333 360 8691
- CoverageRingmer: BN8