
Fuse Box Replacement in Broyle Side
Broyle Side lies in Ringmer parish, a little further out than Ringmer village itself, north east of Lewes. Whether you are replacing an ageing fuse box or getting ready for a heat pump, we fit a new consumer unit at a price agreed up front and test the whole house.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
Fuse box services for Broyle Side
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes

Houses and cottages along country lanes
Broyle Side is a rural village of houses and cottages along country lanes. Homes built at different times, or extended over several decades, often end up with a board that has been added to rather than replaced, with odd breakers, empty fuse carriers and labels that no longer match the rooms they claim to control.
A new consumer unit tidies all of that into one clearly labelled board with RCD protection on every circuit. Dual RCD boards start at £425 and full RCBO boards at £625. Type 2 surge protection is included either way, and the certificate arrives within 48 hours.
- Mismatched breakers replaced
- Every circuit labelled
- RCD protection throughout
- Surge protection included

From oil or LPG to a heat pump
If your home is heated by oil or LPG, as many rural homes away from the gas main are, a heat pump may be on your list. The heat pump, its controls and often an immersion heater back up add a large new load to the house. An older board, especially one with a single RCD or no spare ways, is rarely ready for that.
We fit a board with properly rated ways for the heat pump and its controls, check the main fuse and earthing, and tell you if UK Power Networks may need to look at your supply. Doing the board before the heating installer arrives keeps their visit simpler.
- Ways sized for a heat pump
- Main fuse and supply checked
- Ready before the heating installer
- Fine with oil or LPG until you switch
Our route out to Broyle Side
From Brighton & Hove we drive out on the A27 to Lewes, then through Ringmer and on into the parish lanes. We fix the price from a picture of your board, then settle on a date together. No power, or a scorched board? Ring, and we will get someone out that day whenever it can be managed.
Broyle Side at a glance
- ParishRingmer
- CouncilLewes District Council
- PostcodeBN8
- From Lewes5.6 km north east
- Planning ahead forHeat pumps and electric heating
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Fixed prices in Broyle Side
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
No travel charge to Broyle Side. Full breakdown on the pricing page.
Asked in Broyle Side
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691Often not, though the answer turns on how big the heat pump is and what else the house draws. Most homes have a single phase supply with a main fuse of 60, 80 or 100 amps. We check yours and make a simple load estimate. If an upgrade looks necessary, an application can be made to UK Power Networks.
Before is usually better. The heat pump installer then connects to a modern board with a suitable way waiting, rather than adding a separate switch fuse beside an old setup. It also means any wiring faults are found and fixed before a new heating system comes to rely on them.
Not at all. Storage heaters usually run on a separate off peak circuit, sometimes with its own meter or board. We can bring those circuits onto the new consumer unit or keep the split arrangement, depending on your meter and tariff, and make sure everything is clearly labelled and properly protected.
Also covering places near Broyle Side
Book your Broyle Side fuse box replacement
Is a heat pump on the way? Say so in your text message to 0333 360 8691, along with a photo of your fuse box at your Broyle Side home. We will price the right board, fixed.
- Call, 8am to 8pm0333 360 8691
- CoverageBroyle Side: BN8