Northiam parish, deep in Rother
Fuse Box Replacement in Mill Corner
Of the hamlets in Northiam parish, Mill Corner is among the smaller, lying north west of Winchelsea. A fuse box replacement here comes at a fixed price, and one stuck in an awkward spot can be moved during the same visit.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
What we do in Mill Corner
Fuse box services for Mill Corner
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes
Our standard installationFull RCBO board with surge protection
Boards in odd places
Older homes, inconvenient fuse boxes
Older rural houses were rarely designed around a fuse box. In country homes, boards often ended up wherever the supply first came in: high on a wall, inside a porch, behind a coat cupboard or out in an outbuilding. Later extensions can leave the board in a room it no longer suits, so reaching it when something trips becomes a nuisance.
A board change is the ideal time to put that right. Moving the board to a better position adds £250 to the cost of a new consumer unit, while the meter itself stays put unless UK Power Networks or your supplier moves it. We explain what can move before you commit.
- Board moved for £250 with a new unit
- Easier reach when something trips
- Meter position explained
- Neat cable routes planned first
Specified for Mill CornerTimber, tile and weatherboard
Timber, tile and weatherboard
Care inside traditional Wealden houses
Northiam parish lies in the High Weald, where traditional houses are often timber framed, tile hung or weatherboarded. Old timbers, lath and plaster and low ceilings call for a careful approach, because new cable runs should avoid cutting into historic fabric wherever possible. That matters even more when a board is being relocated rather than swapped in place.
We plan routes through existing voids, cupboards and floor spaces, and agree them with you before starting. If the house is listed and a relocation would alter historic fabric, we suggest checking with the conservation team at Rother District Council before work begins.
- Cable routes agreed in advance
- Existing voids used where possible
- Historic fabric left alone
- Listed building questions flagged
Getting to you
How we get to Mill Corner
We head east through Hastings and up the A28 into Northiam parish to reach Mill Corner. Whatever the distance, the fixed price is the same as it would be in Brighton. For a move, we need to see the board and its intended new home in pictures by text, while urgent faults are better phoned through.
Mill Corner at a glance
- ParishNorthiam
- CouncilRother District Council
- PostcodeTN31
- Nearest townWinchelsea, 10 km south east
- Typical homesOlder rural houses, some timber framed
How long does it take?
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Pricing guide
Fixed prices in Mill Corner
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Most popular
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
Surge protection retrofit £165
Relocation with a new board add £250
Standalone relocation £395
EICR with any board £99
Standalone EICR £175 to £350
No travel charge to Mill Corner. Full breakdown on the pricing page.
Mill Corner questions
Asked in Mill Corner
Still not sure?
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691Yes, in most homes. Relocating the board while fitting a new one adds £250, and a relocation on its own costs £395. The board has to stay connected to the meter by suitably sized cables, so the new spot needs to be reasonably close. Send photos of both positions and we will confirm it is practical.
Within 48 hours you will have an emailed Electrical Installation Certificate showing the test results for every circuit. Building Control is notified through our Part P registration as well, creating a compliance record for the property. Keep both with the details of our 6 year workmanship guarantee, alongside your other house documents.
Sometimes, if that is the neatest route for the cables. We discuss the route with you first and choose the option that disturbs the house least, which might be through a cupboard, along a skirting or under a floor. Anything we lift goes back down carefully before we leave.
Nearby
Also covering places near Mill Corner
Ready when you are
Book your Mill Corner fuse box replacement
Two pictures will do, one of the board and one of where you would rather it was. Text them over on 0333 360 8691 and the Mill Corner price we quote stays fixed.
- Call, 8am to 8pm0333 360 8691
- CoverageMill Corner: TN31