
Fuse Box Replacement in Holtye
Its post town is Edenbridge because Holtye, a hamlet in Hartfield parish on the A264 east of East Grinstead, sits so close to the Kent border. None of that changes how we work, and a fuse box here is replaced at a fixed price, exactly as it would be anywhere else in Sussex.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
Fuse box services for Holtye
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes

A hamlet strung along the A264
Holtye is a loose scatter of houses and cottages along the main road and the lanes off it, set among farmland and woods, with an exposed stretch of the old London to Lewes Roman road nearby. Homes here have usually been updated in stages, so it is common to find an old board feeding a mix of original and newer circuits.
For most cottages and medium sized houses the right fit is 10 ways under dual RCD protection, from £495, or, where the circuit count is higher, a 12 way high integrity board from £575. Each board also carries Type 2 surge protection, which earns its keep at the far end of a long rural supply line.
- Cottages updated in stages
- 10 way dual RCD from £495
- High integrity 12 way £575
- Surge protection included

Heat pumps, oil boilers and the fuse box
Many homes in small rural hamlets like Holtye are not connected to mains gas and rely on oil, LPG or electric heating. When owners switch to an air source heat pump, the electrical load rises sharply, and an older fuse box with no spare way and no RCD protection is rarely in a fit state to take it.
We can replace the board before the heating installer arrives, leaving a dedicated way for the heat pump and spare capacity for an immersion heater or car charger later. We also record the main fuse rating and earthing arrangement on your certificate, which the heat pump installer will want to see.
- A way kept for the heat pump
- Room for future circuits
- Main fuse rating recorded
- Earthing noted for installers
Out along the A264 to Holtye
Our route from Brighton & Hove runs north on the A22 to East Grinstead and then east along the A264. An Edenbridge postal address changes nothing, and travel is never added to the bill. Texting a few photos is the quickest route to a fixed price, while a supply that fails completely is answered the same day whenever that can be done.
Holtye at a glance
- ParishHartfield
- CouncilWealden District Council
- PostcodeTN8, Edenbridge post town
- Nearest townEast Grinstead, 6.2 km west
- SettingRural, close to the Kent border
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Fixed prices in Holtye
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
No travel charge to Holtye. Full breakdown on the pricing page.
Asked in Holtye
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691Yes. Holtye's TN8 postcode belongs to the Edenbridge post town, but the hamlet itself is in Hartfield parish, East Sussex, under Wealden District Council. It is covered at our normal fixed prices, with the journey free, and the board change goes to Building Control for Part P notification in the usual way.
Not always, but often. A heat pump needs its own suitably protected circuit, and many older boards have neither a spare way nor RCD protection. If your board is modern and has room, it may cope as it is. Photos of the board, meter and main fuse let us give you a straight answer on whether a replacement is needed.
Our own directly employed installers, never subcontractors. They work to BS 7671 18th Edition and hold Level 3 inspection and testing qualifications. The business is Part P registered and carries £5m public liability insurance, and the workmanship on every board is guaranteed for six years.
Also covering places near Holtye
Book your Holtye fuse box replacement
Expecting a heat pump? Tell us on 0333 360 8691, in the same message as pictures showing the fuse box and the meter, and the fixed price will be set with your plans in mind.
- Call, 8am to 8pm0333 360 8691
- CoverageHoltye: TN8