Behind the rock breakwaters
Fuse Box Replacement in Elmer
Elmer is the eastern end of Middleton-on-Sea parish, a residential corner of the coast with rock breakwaters lying just off the beach. Homes here stand on flat, low ground, so where a fuse box is mounted really matters. We replace old boards at fixed prices and can lift them out of harm's way.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
What we do in Elmer
Fuse box services for Elmer
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes
Our standard installationFull RCBO board with surge protection
Shoreside homes
Bungalows and houses close to the beach
Elmer is made up mainly of residential roads of bungalows and detached houses running down towards the shore, a quiet place with little passing traffic. Most homes date from the middle and later twentieth century, and plenty still have the board they were built with, or a replacement from the 1980s that leaves some circuits without RCD protection.
Swapping to a new consumer unit brings every circuit up to modern protection, builds in a Type 2 surge device and includes a complete test of the property. We arrange a time that suits you, keep disruption to a single day for most homes, and walk you through the new board before we leave.
- Older boards without RCDs replaced
- Surge protection included
- Full test of every circuit
- New board explained before we go
Specified for ElmerLow ground by the sea
Low ground by the sea
Flood-aware board positions
This stretch of coast is flat and low, and it is protected by sea defences for good reason. In homes that sit low or have had water in before, flood resilience guidance suggests keeping the consumer unit and meter well above floor level, with sockets raised where practical. A board change is a sensible time to make that move.
Raising the board alongside a replacement adds £250, and we plan the new position with you so it stays easy to reach without steps. The meter belongs to your supplier, so we cannot move it ourselves, but we can tell you how to ask them if you want both lifted.
- Board raised clear of floor level
- Relocation £250 with a new board
- Advice on moving the meter
- RCD protection on every circuit
Getting to you
Travelling to Elmer
Elmer is reached from Brighton & Hove along the A27 and the A259 towards Bognor Regis. Once we have pictures showing your board and meter, the price is fixed and you choose the day. Should water get into your electrics, stay clear of the board and report it to UK Power Networks on 105 before phoning us, and we will get there that day whenever we can.
Elmer at a glance
- ParishMiddleton-on-Sea
- CouncilArun District Council
- PostcodePO22
- Nearest townFelpham, 3.4 km west
- SettingLow-lying coastal land
How long does it take?
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Pricing guide
Fixed prices in Elmer
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Most popular
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
Surge protection retrofit £165
Relocation with a new board add £250
Standalone relocation £395
EICR with any board £99
Standalone EICR £175 to £350
No travel charge to Elmer. Full breakdown on the pricing page.
Elmer questions
Asked in Elmer
Still not sure?
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691There is no single figure for every property. The aim is to keep it clear of the highest water level you could reasonably expect, which usually means mounting it higher up the wall, while keeping it reachable without steps. We look at your home and agree a position with you before quoting.
Yes, but safety comes first. Do not touch a wet board or switch anything back on. Once the property has dried out we test every circuit, because water can damage cables and accessories as well as the board itself. You then get a fixed price for the new board and any repairs needed.
Yes. Elmer sits within Middleton-on-Sea parish and shares the PO22 postcode district, so it is covered on exactly the same terms: fixed prices, no travel charge and the same directly employed installers who work across the rest of Sussex. Getting started takes nothing more than a picture of the existing board.
Nearby
Also covering places near Elmer
Ready when you are
Book your Elmer fuse box replacement
If flooding is on your mind, say so alongside the picture of your board when you text 0333 360 8691, and the quote for your Elmer home will cover both a replacement and a raised position.
- Call, 8am to 8pm0333 360 8691
- CoverageElmer: PO22