Farmland hamlet in Yapton parish
Fuse Box Replacement in Bilsham
With fields all around and Yapton village close by, the hamlet of Bilsham belongs to Yapton parish and lies north east of Felpham. Rural properties like these often feed garages, barns or workshops from the house board, so we look at the whole setup when we replace a fuse box.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
What we do in Bilsham
Fuse box services for Bilsham
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes
Our standard installationFull RCBO board with surge protection
Scattered homes, mixed ages
Rural homes around Bilsham
As a hamlet, Bilsham is a small cluster of homes rather than a street plan, and rural properties rarely have one tidy board. It is common to find an original fuse box alongside a newer unit added for a kitchen or extension, plus separate switches for a shower or an immersion heater, each with its own age and condition.
We start by tracing what every fuse and switch feeds, then design one replacement board around the circuits you actually have. Most cottages out here are well served by a 10 way board with dual RCD protection at £495, and full RCBO boards, where every circuit trips independently, begin at £625.
- Every circuit traced and labelled
- Separate fused units consolidated
- Immersion and shower circuits checked
- Fixed price agreed up front
Specified for BilshamBarns, garages and workshops
Barns, garages and workshops
Supplies that run beyond the house
Out in farmland, power often travels from the house to a detached garage, stable, workshop or store along an underground or overhead cable. Those runs were sometimes installed long after the house wiring, occasionally in cable never meant to be buried, and many have no RCD protection. When the board in the house is changed, that outgoing supply has to be tested and protected properly too.
On a Bilsham job we measure the outbuilding circuit, check its earthing and confirm the cable is suitable before connecting it to the new board. If the outbuilding has its own small board, we check that as well and tell you plainly if anything needs further work, with a price before we touch it.
- Outbuilding cables tested
- Correct protection at the house end
- Earthing at the outbuilding checked
- Further work priced first
Getting to you
Booking a visit to Bilsham
From Brighton & Hove we leave the A27 at Arundel and head south across the flat coastal plain towards Yapton, and the hamlet is a few minutes beyond the village. Ring us on any day of the week to fix a date. If the house has no power or the board is running hot, tell us when you ring, and we will do our best to get someone there that same day.
Bilsham at a glance
- ParishYapton
- CouncilArun District Council
- PostcodeBN18
- Nearest town pageFelpham, 3.3 km south west
- What we checkOutbuilding cables and earthing
How long does it take?
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Pricing guide
Fixed prices in Bilsham
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Most popular
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
Surge protection retrofit £165
Relocation with a new board add £250
Standalone relocation £395
EICR with any board £99
Standalone EICR £175 to £350
No travel charge to Bilsham. Full breakdown on the pricing page.
Bilsham questions
Asked in Bilsham
Still not sure?
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691The circuit feeding it needs suitable protection at the house end, and in most cases that includes RCD protection. If the workshop has its own board, the arrangement between the two has to be worked out so a fault trips the right device. We test the cable and earthing, then set it up properly on the new board.
Yes. Bilsham and Yapton share the BN18 postcode district with Arundel, which is why many addresses carry the Arundel post town. We work right across Sussex at the same prices, without adding anything for travel, so a Bilsham board change starts at £425 for six ways with dual RCD protection, just as it would elsewhere.
We stop and show you. Testing before the new board goes in sometimes reveals a damaged cable, a missing earth or a circuit that is unsafe to reconnect. We explain what it is, why it matters and what it costs to put right, and nothing extra happens unless you agree. The fixed price for the board itself does not change.
Nearby
Also covering places near Bilsham
Ready when you are
Book your Bilsham fuse box replacement
Snap the board, plus any switches for outbuildings, and send the pictures by text on 0333 360 8691. The Bilsham price you get back is fixed, with the journey costing you nothing.
- Call, 8am to 8pm0333 360 8691
- CoverageBilsham: BN18