Where the A27 meets the A284
Fuse Box Replacement in Crossbush
Crossbush sits at the junction of the A27 and the A284, just south east of Arundel across the Arun valley. Because it lies right on our route west from Brighton, it is an easy call for us: old fuse boxes and plastic consumer units are swapped at fixed prices that include Type 2 surge protection.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
What we do in Crossbush
Fuse box services for Crossbush
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes
Our standard installationFull RCBO board with surge protection
Crossbush homes
Roadside houses on the edge of Arundel
Crossbush is a small settlement rather than a town street, with homes set along the roads near the junction and looking back towards Arundel. As around most of the town, the housing is a mix of ages. Boards in homes like these range from original fuse carriers to plastic consumer units from the 1990s and 2000s, which the wiring regulations no longer allow in new domestic work.
A plastic board fitted before 2016 is not automatically dangerous, but it deserves a look, especially if some circuits have no RCD protection. In its place goes a metal enclosure carrying Type 2 surge protection, then the whole property is tested before we hand you the certificate.
- Metal enclosures as standard
- RCD protection for all circuits
- Surge protection fitted
- Certificate within 48 hours
Specified for CrossbushElectric cars and commuting
Electric cars and commuting
Ready for a home car charger
Living beside the A27, households here are likely to depend on a car, and more of them are switching to electric. A home charger is a large, steady load, often 32 amps for hours at a time, and an older board with no spare ways or a borderline main supply can make fitting one awkward or impossible without further changes.
When we fit your new consumer unit we can leave a spare way for a future charger and record the main fuse size and supply arrangement on your paperwork. That gives whoever installs the charger a clear starting point and avoids a second board change later.
- Spare way kept for a charger
- Main fuse size recorded
- Supply details on paper
- No second board change later
Getting to you
Crossbush from Brighton & Hove
Heading west on the A27 through Worthing, our installers arrive at Crossbush before they have even reached Arundel, and the trip costs you nothing extra. Planned replacements are booked for whichever day suits you. If your power has gone off, phone us and we will do everything we can to get there before the day is out.
Crossbush at a glance
- ParishLyminster and Crossbush
- Local authorityArun District Council
- PostcodeBN18
- Distance to Arundel1.5 km
- Common upgradeEV ready board with spare way
How long does it take?
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Pricing guide
Fixed prices in Crossbush
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Most popular
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
Surge protection retrofit £165
Relocation with a new board add £250
Standalone relocation £395
EICR with any board £99
Standalone EICR £175 to £350
No travel charge to Crossbush. Full breakdown on the pricing page.
Crossbush questions
Asked in Crossbush
Still not sure?
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691A new consumer unit can have a spare way kept free for a dedicated charger circuit, and we check the main fuse rating and earthing arrangement while we are there. Whether the supply has enough capacity depends on your other loads, so we record what we find and flag anything UK Power Networks may need to look at first.
No rule forces an owner to replace a plastic board fitted before 2016, because the non combustible requirement applies to new work. Older plastic units often lack full RCD and surge protection, though, and any sign of heat damage, scorching or unexplained tripping means it should go. If you are unsure, a standalone EICR from £175 will show where it stands.
Your Electrical Installation Certificate, setting out test results for every circuit, reaches you by email in under 48 hours. We also notify Building Control of the work through our Part P registration, after which a Building Regulations compliance certificate arrives separately. Keep both somewhere safe, because buyers, insurers and letting agents may ask to see them.
Nearby
Also covering places near Crossbush
Ready when you are
Book your Crossbush fuse box replacement
Planning an electric car, or simply tired of an old fuse box? We can price your Crossbush board change from one photo, texted over to 0333 360 8691.
- Call, 8am to 8pm0333 360 8691
- CoverageCrossbush: BN18