
Fuse Box Replacement in Bellhurst
Bellhurst, a hamlet in the countryside of Hurst Green parish, lies north of Battle. If your home here still has an old fuse box, we can replace it with a modern consumer unit and look over the incoming supply arrangements at the same visit, all for a fixed price.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
Fuse box services for Bellhurst
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes

What to expect in a small rural hamlet
Bellhurst is a handful of homes in the countryside of Hurst Green parish, and that shapes the electrics. Properties in a hamlet like this are usually individual houses and cottages, some with long histories, set a fair distance from their neighbours. The supply often arrives by overhead line, and the meter may sit in an outside box rather than in the hall.
None of that is a problem, but it does mean the board change starts outside. We look at where the supply comes in, how far the meter tails run to the board, and whether there is a proper means of isolation, before planning the new installation.
- Outside meter boxes
- Long tail runs assessed
- Isolation planned in
- Fixed price from photos

The cut out, the meter and your new board
Three parties meet at your meter position. The cut out, with its main fuse, belongs to UK Power Networks. The meter belongs to your energy supplier. Everything after the meter, from the tails to the consumer unit and every circuit beyond it, is yours. A board change sits on your side of that line, but the condition of the other two still affects the job.
If the cut out is cracked, its seal is missing or the main fuse looks undersized for your plans, we point it out and tell you how to raise it with UK Power Networks. Where there is no isolator switch between meter and board, adding one makes future work easier for everyone.
- Cut out condition noted
- Main fuse rating checked
- Isolator advised where missing
- Network contacts explained
Travelling out to Bellhurst
Getting to Bellhurst from Brighton & Hove, our installers take either the A21 or the A265 into Hurst Green parish, depending on which road suits the day. A clear set of photos gets you a fixed price before we book. A scorched or buzzing board counts as an emergency, so phone us straight away and we will do our best to get there that same day.
Bellhurst at a glance
- ParishHurst Green
- CouncilRother District Council
- PostcodeTN19
- Nearest townBattle, 12.1 km south
- Supply we expectOften overhead, sometimes TT
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Fixed prices in Bellhurst
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
No travel charge to Bellhurst. Full breakdown on the pricing page.
Asked in Bellhurst
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691That is UK Power Networks, as the cut out and main fuse are theirs. They handle supply upgrades and can tell you whether a larger fuse is possible on your existing cable. We can tell you what rating you have now and what you are likely to need, and the new board can be fitted ready for the upgrade.
It is a switch between the meter and the consumer unit that lets the whole installation be turned off safely without removing the main fuse. It is not always required, but it makes future work, including meter changes, much simpler. If your installation would benefit from one, we explain why when we price the job.
Generally not. An outdoor meter box is not designed to house a consumer unit, and a standard board belongs somewhere dry and easy to reach inside. The new board normally goes where the old fuse box is. If that spot is poor and a better position exists indoors, relocation with a new board adds £250.
Also covering places near Bellhurst
Book your Bellhurst fuse box replacement
Text photos of the fuse box, the meter and the outside meter box if you have one to 0333 360 8691. From those pictures we can put a fixed price on the work at your Bellhurst property.
- Call, 8am to 8pm0333 360 8691
- CoverageBellhurst: TN19