Rural hamlet in Southwater parish

Fuse Box Replacement in Two Mile Ash

Two Mile Ash is a scattered hamlet in Southwater parish, set in farmland south west of Horsham. We replace tired fuse boxes in its cottages and country houses with modern consumer units, at a fixed price agreed from your photos, and we test the whole property before leaving.

  • Part P registered installers
  • Fitted and certified in a day
  • Surge protection as standard
  • Fixed prices, no surprises
  • 17+ YearsEst. 2009 in Brighton & Hove
  • 6 Year GuaranteeWorkmanship, every board
  • Specialist TeamDirectly employed installers
  • Free QuotationSurvey or photo, no call out fee
  • 2,400+Boards replaced since 2009
What we do in Two Mile Ash

Fuse box services for Two Mile Ash

Full RCBO consumer unit with surge protection, neatly wired and labelled in a Sussex home
Our standard installationFull RCBO board with surge protection
Spread along the lanes

Country homes with boards of every vintage

Homes in a hamlet like Two Mile Ash are strung out along lanes rather than grouped into streets, and most have been altered over the decades. A cottage extended twice, a barn turned into living space, a garage given its own little fuse box: each change leaves its mark. The meter cupboard can end up holding two or three units of different ages, none offering full RCD protection.

We bring all of that back to one properly labelled consumer unit. For a modest cottage, a dual RCD board at £425 upwards does the job, but a bigger house with an annexe or workshop is usually better on full RCBO protection, which starts at £625 for 8 ways and lets each circuit trip on its own.

  • Scattered units combined
  • Extensions on one board
  • Every circuit labelled
  • Type 2 surge protection fitted
Large distribution board being installed with cable tray and busbar, levelled and ready for termination
Specified for Two Mile AshOff the gas main?
Off the gas main?

Planning for a heat pump in Two Mile Ash

Rural homes away from the gas network often heat with oil, LPG or electric storage heaters, and many owners are now weighing up an air source heat pump instead. If that describes your house, the consumer unit matters. Any heat pump has to have its own dedicated circuit, and a tired fuse box without spare ways or RCDs makes a poor starting point for that.

Mention your heating plans when you send photos. We can size the new board with a way reserved for the heat pump and room for any immersion or buffer tank circuits, and we record your main fuse rating and earthing so the heating engineer knows exactly what supply they are working with.

  • Way reserved for a heat pump
  • Storage heater circuits kept
  • Main fuse rating recorded
  • Earthing noted for installers
Getting to you

From Brighton to the lanes past Southwater

We normally come up the A24 and turn off at Southwater, and the lanes into the hamlet add only a few minutes. The order is simple: photos of the board first, a fixed price agreed, then a date of your choosing. Lose power altogether and a call on any day of the week sets us working to get to you before that day ends.

Two Mile Ash at a glance

  • ParishSouthwater
  • CouncilHorsham District Council
  • PostcodeRH13
  • Nearest townHorsham, 4.3 km north east
  • Typical homesRural cottages and detached houses
How long does it take?

A new consumer unit, fitted in a day

  1. 01
    The first hour

    Protect, isolate, strip out

  2. 02
    Hours two to four

    Fit and terminate the new board

  3. 03
    Hour five

    Test every single circuit

  4. 04
    The final hour

    Energise, label, walk through

Not sure how many ways your board needs?

Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.

Send a photo
Pricing guide

Fixed prices in Two Mile Ash

Dual RCD board

6 way, from£425
  • Ideal for 1 to 2 bed flats
  • 10 way from £495
  • Surge protection included
Get a quote

High integrity

12 way, from£575
  • 3 to 4 bed houses
  • Critical circuits isolated
  • Surge protection included
Get a quote
Most popular

Full RCBO board

8 way, from£625
  • 10 to 12 way from £695
  • 14 to 16 way from £795
  • Our recommendation
Book a survey

RCBO + AFDD

10 way, from£1,095
  • 14 way from £1,295
  • HMOs & period terraces
  • Selected circuits from £845
Get a quote
Surge protection retrofit £165 Relocation with a new board add £250 Standalone relocation £395 EICR with any board £99 Standalone EICR £175 to £350

No travel charge to Two Mile Ash. Full breakdown on the pricing page.

Two Mile Ash questions

Asked in Two Mile Ash

Still not sure?

Call for a straight answer from an installer, not a call centre.

Call 0333 360 8691

In most cases, yes. Fitting the new consumer unit first gives the heat pump installer a tested, protected circuit to connect to, rather than having to work around an old fuse box. If the incoming supply also needs more capacity, that application goes to UK Power Networks, and our certificate holds the details they will ask for.

We read the rating of the main fuse in the sealed cut-out during the job and record it on your certificate. Older supplies are sometimes only 60 amps, which can be tight once a heat pump, an electric shower and a car charger all share it. The cut-out belongs to the network, so any upgrade is arranged with UK Power Networks.

Always. We do not use subcontractors. Every installer is directly employed by us, Part P registered and qualified to the 18th Edition, with Level 3 inspection and testing. The same person who fits the board tests every circuit in the house and signs the Electrical Installation Certificate, which we email to you within 48 hours.

Ready when you are

Book your Two Mile Ash fuse box replacement

Weighing up a heat pump, or simply done with the old fuses? Either way, a single board photo texted to 0333 360 8691 is the first step towards a fixed Two Mile Ash price.

Request a free quote

No obligation, no call out fee. We reply the same day.

Prefer a photo quote? Text a picture of your fuse box to 0333 360 8691.