
Fuse Box Replacement in Mountfield
Mountfield is a village and parish a short way north of Battle, known locally for its gypsum workings. Where homes here are off mains gas, the move to a heat pump usually starts at the fuse box. We fit consumer units that can take the load, at fixed prices.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
Fuse box services for Mountfield
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes

Housing across a spread-out parish
Mountfield parish covers a good stretch of countryside north of Battle, so homes range from houses in the village to farmhouses and cottages further out along the lanes. Boards vary just as much, from old fuse boxes with no RCD protection to plastic consumer units fitted before the regulations began requiring fire resistant enclosures in homes.
Every board we fit has a metal enclosure, as the wiring regulations now expect for homes, plus Type 2 surge protection. A dual RCD 6 way board is £425; a full RCBO board with 8 ways is £625, which suits households planning extra circuits.
- Metal enclosure as the regulations expect
- Surge protection fitted as standard
- RCD protection on every circuit
- Room left for future circuits

Planning for a heat pump in Mountfield
A heat pump replaces an oil or LPG boiler with an electrical load that runs for long hours through the winter. The heating installer will want a dedicated, correctly protected circuit, and the incoming supply has to be able to carry it. Where the existing fuse box lacks both RCD protection and a spare way, it is normally the first thing to go.
We fit a board sized for the heat pump and anything else you have planned, such as an immersion heater or a car charger. If the main fuse at the meter looks too small for the total load, we explain how to ask UK Power Networks about an upgrade before your heating work is booked.
- Dedicated heat pump circuit planned
- Main fuse capacity assessed
- Spare ways for immersion and charger
- Network upgrade process explained
Heading north from Battle
Seen from Brighton & Hove, Mountfield lies on the far side of Battle. We reach it through Battle, heading north, a straightforward run for our installers. Once your board photos have given us a fixed quote, you pick the date, and if a heat pump installer is involved, tell us when they are booked so our visit fits around theirs. If something urgent goes wrong, ring, and wherever possible we get someone to you that day.
Mountfield at a glance
- ParishMountfield
- CouncilRother District Council
- PostcodeTN32
- Nearest townBattle, 4.3 km south
- Heating to plan aroundOften oil, LPG or electric
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Fixed prices in Mountfield
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
No travel charge to Mountfield. Full breakdown on the pricing page.
Asked in Mountfield
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691Very. A heat pump needs its own circuit with the right protection, and many older boards have no spare ways or no RCD at all. Replacing the board first means the heating installer connects to something that already meets current standards. We can liaise on dates so the two jobs follow each other without a gap.
Since 2016, the wiring regulations have required consumer units in homes to have enclosures made of non-combustible material, which in practice means steel. If a loose connection overheats, a metal case helps contain the heat and any fire inside it. All of our boards meet that requirement as standard, at no extra cost.
It is possible, especially on older rural supplies. The rating is printed on the network operator's fuse, usually beside the meter. We check it, add up your expected load, and if it falls short we explain how to request an upgrade from UK Power Networks. Sorting this early avoids delays once the heat pump arrives.
Also covering places near Mountfield
Book your Mountfield fuse box replacement
Planning new heating, or simply replacing a worn out fuse box? A handful of pictures sent our way on 0333 360 8691 is all we need to put a fixed Mountfield price in front of you.
- Call, 8am to 8pm0333 360 8691
- CoverageMountfield: TN32