Village between Goring and Kingston

Fuse Box Replacement in Ferring

Ferring is a coastal village just west of Goring, in Arun district but sharing the BN12 postcode with its Worthing neighbour. Bungalows make up much of the village, and we replace their fuse boxes, including old off peak boards, at fixed prices with no travel charge.

  • Part P registered installers
  • Fitted and certified in a day
  • Surge protection as standard
  • Fixed prices, no surprises
  • 17+ YearsEst. 2009 in Brighton & Hove
  • 6 Year GuaranteeWorkmanship, every board
  • Specialist TeamDirectly employed installers
  • Free QuotationSurvey or photo, no call out fee
  • 2,400+Boards replaced since 2009
What we do in Ferring

Fuse box services for Ferring

Full RCBO consumer unit with surge protection, neatly wired and labelled in a Sussex home
Our standard installationFull RCBO board with surge protection
Bungalows and chalet bungalows

Single storey living, long serving boards

Bungalows and chalet bungalows make up much of Ferring's housing, with some larger houses towards the sea. Much of the village was built up during the twentieth century, and in homes that have had the same owner for many years it is common to find a fuse box that has been doing the same job, untouched, for decades.

In a bungalow the board is usually in the hall, a cupboard or the garage, and a replacement can normally go in the same place. For many, a dual RCD unit with six ways, from £425, does the job. If you would like every circuit protected separately, a full RCBO board starts at £625.

  • Hall and garage boards replaced
  • 6 way dual RCD from £425
  • Long serving fuse boxes retired
  • Power restored the same day
Large distribution board being installed with cable tray and busbar, levelled and ready for termination
Specified for FerringStorage heaters and off peak
Storage heaters and off peak

Two meters, two boards, one tidy answer

Electric storage heating on an off peak tariff turns up in bungalows and flats along this part of the coast. Homes heated this way often have two boards, one for the everyday circuits and another for the heaters and immersion, sometimes with a separate time switch or a second meter. That second board is frequently the most neglected part of the whole installation.

We can replace both boards together, or combine them into a single split unit where the meter arrangement allows, keeping the off peak circuits switched as before. If you are thinking of swapping storage heaters for a heat pump later, tell us now so the new board can be planned for it.

  • Off peak boards replaced
  • Storage heater circuits retested
  • Immersion heater wiring checked
  • Ready for a heat pump later
Getting to you

Ferring jobs, booked and urgent

Ferring is west of Brighton along the A259, with Rustington a few minutes to the west and Goring next door to the east. Getting to you adds nothing to the bill, quoting from photos is free and the date is up to you. A board that keeps tripping or refuses to reset is worth a call, and we will look to send someone the same day.

Ferring at a glance

  • ParishFerring
  • CouncilArun District Council
  • PostcodeBN12, shared with Goring
  • Nearest townRustington, 3.9 km west
  • Typical homesBungalows, chalet bungalows, houses
How long does it take?

A new consumer unit, fitted in a day

  1. 01
    The first hour

    Protect, isolate, strip out

  2. 02
    Hours two to four

    Fit and terminate the new board

  3. 03
    Hour five

    Test every single circuit

  4. 04
    The final hour

    Energise, label, walk through

Not sure how many ways your board needs?

Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.

Send a photo
Pricing guide

Fixed prices in Ferring

Dual RCD board

6 way, from£425
  • Ideal for 1 to 2 bed flats
  • 10 way from £495
  • Surge protection included
Get a quote

High integrity

12 way, from£575
  • 3 to 4 bed houses
  • Critical circuits isolated
  • Surge protection included
Get a quote
Most popular

Full RCBO board

8 way, from£625
  • 10 to 12 way from £695
  • 14 to 16 way from £795
  • Our recommendation
Book a survey

RCBO + AFDD

10 way, from£1,095
  • 14 way from £1,295
  • HMOs & period terraces
  • Selected circuits from £845
Get a quote
Surge protection retrofit £165 Relocation with a new board add £250 Standalone relocation £395 EICR with any board £99 Standalone EICR £175 to £350

No travel charge to Ferring. Full breakdown on the pricing page.

Ferring questions

Asked in Ferring

Still not sure?

Call for a straight answer from an installer, not a call centre.

Call 0333 360 8691

Yes. The heaters are controlled by the off peak supply from your meter or a time switch, not by the consumer unit itself. We keep that arrangement as it is, reconnect the heater circuits to suitable breakers and test them before we leave. If anything about the existing setup looks unsafe, we explain it to you first.

Warning signs include rewirable fuses with wire in them, a wooden back or cast iron case, no RCD test button, frequent tripping, scorch marks or a board that feels warm. A board with no RCD protection falls short of current standards even if it seems to work. A quick photo is enough for an honest answer on whether yours needs replacing.

Ferring sits in the BN12 postcode district alongside Goring, even though Ferring is in Arun district and Goring is in Worthing borough. It makes no difference to us: we cover both at the same prices, and the work is notified under Part P whichever council you fall under.

Ready when you are

Book your Ferring fuse box replacement

Text photos of your Ferring board, plus any off peak board or time switch, to 0333 360 8691. You will get a fixed price for the whole job.

Request a free quote

No obligation, no call out fee. We reply the same day.

Prefer a photo quote? Text a picture of your fuse box to 0333 360 8691.