
Fuse Box Replacement in Cooksbridge
Cooksbridge has its own railway station and the A275 running through it, and this small village belongs to Hamsey parish, north of Lewes. Old fuse boxes are swapped for new consumer units at a fixed price, and each job covers surge protection to Type 2, a full test of the house and a certificate sent by email no more than 48 hours later.
- Part P registered installers
- Fitted and certified in a day
- Surge protection as standard
- Fixed prices, no surprises
- 17+ YearsEst. 2009 in Brighton & Hove
- 6 Year GuaranteeWorkmanship, every board
- Specialist TeamDirectly employed installers
- Free QuotationSurvey or photo, no call out fee
- 2,400+Boards replaced since 2009
Fuse box services for Cooksbridge
RCBO Consumer Units
AFDD Consumer Units
Surge Protection
Fuse Box Relocation
Landlord Fuse Box Upgrades
EICR Testing
Transparent Pricing
Free Fixed Quotes

Houses along the main road and the lanes off it
Cooksbridge is made up mainly of homes along the A275 and the lanes leading off it, from older cottages to houses built across the twentieth century. Many have been extended or modernised piecemeal, so the board may be newer than some of the wiring behind it, or older than the kitchen it feeds.
Every circuit is tested during the visit, which tells you whether the wiring is in good shape or whether any part of it needs attention. Where the results are good, a straight board change is all you need. Where they are not, we explain the findings and the cost before going any further.
- Older cottages and later houses
- Wiring tested, not assumed
- Findings explained plainly
- No surprise extras

Garden offices, studios and the board that feeds them
With a station on the doorstep, Cooksbridge suits people who commute on some days and work from home on others. A garden office or studio usually needs its own supply from the house, sized for heating, lighting and computers, and protected so that a fault out there does not trip the whole house.
If you are planning one, it pays to sort the consumer unit first. We fit a board with a dedicated, correctly protected way for the outbuilding and check that your main fuse and earthing can take the extra load. Whoever wires the building then starts from a sound, modern board.
- Dedicated way for the outbuilding
- Main fuse and earthing checked
- A fault in the office stays there
- Board sorted before the build
Up the A275 to Cooksbridge
Coming from Brighton & Hove, we take the A27 to Lewes and then the A275 north to Cooksbridge. Show us the board and the space around it in a photo, and once the price is fixed you can book a day that suits. Anything burning, buzzing or refusing to reset warrants a phone call, with the aim of being there that same day.
Cooksbridge at a glance
- ParishHamsey
- CouncilLewes District Council
- PostcodeBN8
- Nearest townLewes, 3.6 km south
- Good to plan forGarden office and outbuilding supplies
A new consumer unit, fitted in a day
- 01The first hour
Protect, isolate, strip out
- 02Hours two to four
Fit and terminate the new board
- 03Hour five
Test every single circuit
- 04The final hour
Energise, label, walk through
Not sure how many ways your board needs?
Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.
Fixed prices in Cooksbridge
Dual RCD board
6 way, from£425- Ideal for 1 to 2 bed flats
- 10 way from £495
- Surge protection included
High integrity
12 way, from£575- 3 to 4 bed houses
- Critical circuits isolated
- Surge protection included
Full RCBO board
8 way, from£625- 10 to 12 way from £695
- 14 to 16 way from £795
- Our recommendation
RCBO + AFDD
10 way, from£1,095- 14 way from £1,295
- HMOs & period terraces
- Selected circuits from £845
No travel charge to Cooksbridge. Full breakdown on the pricing page.
Asked in Cooksbridge
Call for a straight answer from an installer, not a call centre.
Call 0333 360 8691Usually, yes. The office is fed by a cable from a dedicated way on the main board, often to a small board of its own in the building. The cable needs to suit the distance and the load, and be buried or fixed properly. We check whether your new board and supply can take it before anything is built.
It is common in homes that were updated a bit at a time, but it is not ideal. Mixed boards often leave some circuits without RCD protection, and old fuse wire can end up replaced with the wrong size. A modern consumer unit gives every circuit the right protection and a clear record of what each one does.
Yes. Replacing a consumer unit is notifiable work under Part P of the Building Regulations. As Part P registered installers we notify it for you, so there is no separate application to make. Within 48 hours the Electrical Installation Certificate arrives by email, with a Building Regulations compliance certificate following once the work is registered.
Also covering places near Cooksbridge
Book your Cooksbridge fuse box replacement
The fixed price we give for a Cooksbridge board can allow for a garden office, so mention any plans when you text 0333 360 8691 with a picture of your consumer unit.
- Call, 8am to 8pm0333 360 8691
- CoverageCooksbridge: BN8