Saxon church, quiet valley

Fuse Box Replacement in Bishopstone

Few Sussex churches are older than Bishopstone's, and the hamlet around it sits in a quiet fold of the Downs north west of Seaford, with Newhaven further west. We replace fuse boxes in its homes with modern consumer units, priced up front and usually fitted in a single visit.

  • Part P registered installers
  • Fitted and certified in a day
  • Surge protection as standard
  • Fixed prices, no surprises
  • 17+ YearsEst. 2009 in Brighton & Hove
  • 6 Year GuaranteeWorkmanship, every board
  • Specialist TeamDirectly employed installers
  • Free QuotationSurvey or photo, no call out fee
  • 2,400+Boards replaced since 2009
What we do in Bishopstone

Fuse box services for Bishopstone

Full RCBO consumer unit with surge protection, neatly wired and labelled in a Sussex home
Our standard installationFull RCBO board with surge protection
Hamlet homes

Village character, modern demands

Bishopstone is a small group of houses and cottages around its church, tucked up a valley rather than strung along the main road. Despite its rural feel, Seaford is only a couple of kilometres away, so homes here combine hamlet character with all the demands of a modern household: home offices, bigger kitchens and, more and more, an electric car on the drive.

An old fuse box was never sized for any of that. The new board is laid out with spare ways, each circuit gets RCD protection, and Type 2 surge protection comes as standard. If something unexpected turns up during testing, you hear about it from us straight away, before any decision is needed.

  • Cottages and houses
  • Home office circuits
  • Spare ways for the future
  • Surge protection as standard
Large distribution board being installed with cable tray and busbar, levelled and ready for termination
Specified for BishopstoneCharging at home
Charging at home

Getting ready for an electric car

Out of town, charging an electric car overnight at home is the obvious choice. A 7 kW charger draws around 30 amps for hours at a time, and the charger installer will want to know that your board and supply can cope before fitting one. An old fuse box is often where that plan stalls.

When we replace your board we can include a spare way ready for the charger circuit, check the earthing arrangement the charger will need, and look at your main fuse rating and meter tails. Should the incoming supply prove too small for everything you plan to run, we say so plainly, because that is for UK Power Networks to sort rather than the board.

  • Spare way for a charger
  • Main fuse rating checked
  • Earthing reviewed for EV use
  • Ready for a 7 kW charger
Getting to you

On the coast road between two towns

Bishopstone is close to the A259 between Newhaven and Seaford, which is our usual route east from Brighton & Hove, so it ranks among the quicker places for us to reach in this corner of Sussex. Our phones are answered every day. When the board is the reason your power is off, we look to have an installer with you that same day.

Bishopstone at a glance

  • ParishSeaford
  • CouncilLewes District Council
  • PostcodeBN25
  • Nearest townSeaford, 2.1 km south east
  • Planning aheadEV charger capacity
How long does it take?

A new consumer unit, fitted in a day

  1. 01
    The first hour

    Protect, isolate, strip out

  2. 02
    Hours two to four

    Fit and terminate the new board

  3. 03
    Hour five

    Test every single circuit

  4. 04
    The final hour

    Energise, label, walk through

Not sure how many ways your board needs?

Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.

Send a photo
Pricing guide

Fixed prices in Bishopstone

Dual RCD board

6 way, from£425
  • Ideal for 1 to 2 bed flats
  • 10 way from £495
  • Surge protection included
Get a quote

High integrity

12 way, from£575
  • 3 to 4 bed houses
  • Critical circuits isolated
  • Surge protection included
Get a quote
Most popular

Full RCBO board

8 way, from£625
  • 10 to 12 way from £695
  • 14 to 16 way from £795
  • Our recommendation
Book a survey

RCBO + AFDD

10 way, from£1,095
  • 14 way from £1,295
  • HMOs & period terraces
  • Selected circuits from £845
Get a quote
Surge protection retrofit £165 Relocation with a new board add £250 Standalone relocation £395 EICR with any board £99 Standalone EICR £175 to £350

No travel charge to Bishopstone. Full breakdown on the pricing page.

Bishopstone questions

Asked in Bishopstone

Still not sure?

Call for a straight answer from an installer, not a call centre.

Call 0333 360 8691

Usually not. Every charger needs a dedicated circuit of its own, suitable RCD protection and sound earthing, whereas the typical old fuse box offers no RCD and no spare way. Replacing the board first, from £425, gives the charger installer what they need. Tell us the charger model if you have chosen one, and we will plan for it.

An Electrical Installation Certificate listing every circuit and its test results, emailed within 48 hours. We notify Building Control of the work through Part P, and a compliance certificate follows on its own. Keep both with your house documents: buyers' solicitors and insurers often ask for them.

We agree a date that suits you when you accept the fixed price, and fit around your diary where we can. Photos of the board are the quickest way to get the quote moving. Tell us on the phone if the old board has failed and left you without power, as we then aim to be in Bishopstone that same day.

Ready when you are

Book your Bishopstone fuse box replacement

Planning an electric car, or just done with old fuses? A call to 0333 360 8691 gets you a fixed price for a Bishopstone board change.

Request a free quote

No obligation, no call out fee. We reply the same day.

Prefer a photo quote? Text a picture of your fuse box to 0333 360 8691.