The Sussex side of the border

Fuse Box Replacement in Alfold Bars

At the northern tip of Loxwood parish, Alfold Bars sits close to where West Sussex meets Surrey, with Alfold just over the line. It lies north west of Billingshurst. Homes on the Sussex side get a metal consumer unit from us at a fixed price, Type 2 surge protector and all.

  • Part P registered installers
  • Fitted and certified in a day
  • Surge protection as standard
  • Fixed prices, no surprises
  • 17+ YearsEst. 2009 in Brighton & Hove
  • 6 Year GuaranteeWorkmanship, every board
  • Specialist TeamDirectly employed installers
  • Free QuotationSurvey or photo, no call out fee
  • 2,400+Boards replaced since 2009
What we do in Alfold Bars

Fuse box services for Alfold Bars

Full RCBO consumer unit with surge protection, neatly wired and labelled in a Sussex home
Our standard installationFull RCBO board with surge protection
Homes along the county line

What sits in the cupboard by the front door

Homes around Alfold Bars are a mix of older and more recent properties, and in many the consumer unit is tucked into a hall cupboard or under the stairs. Units fitted in the 1990s and early 2000s were usually plastic, and many of them protect only some circuits with an RCD. They were normal at the time but fall short of today's standard.

Changing one is straightforward. Prices are £425 for a dual RCD board with 6 ways, £495 with 10 ways and £575 for a high integrity version with 12. Larger properties with more circuits may need a full RCBO board of 14 to 16 ways at £795, and all of these prices are fixed and include surge protection.

  • Under stairs boards replaced
  • Plastic enclosures swapped for metal
  • RCD protection on every circuit
  • Old board taken away
Large distribution board being installed with cable tray and busbar, levelled and ready for termination
Specified for Alfold BarsPlastic versus metal
Plastic versus metal

Why new consumer units come in steel cases

Since 2016 the wiring regulations have required consumer units in homes to have a non-combustible enclosure, which in practice means metal. The change followed concern about fires starting at loose connections inside plastic units, often in cupboards under the stairs, which is frequently the way out of a house. Keeping an older plastic board is not illegal, but it no longer meets the current standard.

Every board we fit at Alfold Bars has a steel enclosure, properly sealed cable entries and terminals tightened and tested. If you are buying or selling here, we can add a full EICR for £99 at the same visit, giving you a clear report on the whole installation.

  • Steel enclosure as standard
  • Terminals tightened and checked
  • Cable entries properly sealed
  • EICR £99 alongside a board
Getting to you

Reaching the county edge from Brighton

Alfold Bars sits near the very top of the county. We come up via Billingshurst and through Loxwood, so the last part of the journey is short. Living on the border costs you nothing extra, as we never charge for travel in Sussex. Send photos by text for a fixed quote; if the power has failed, phone instead, with a visit that day as our target.

Alfold Bars at a glance

  • ParishLoxwood
  • CouncilChichester District Council
  • PostcodeRH14
  • Nearest townBillingshurst, 8.8 km south east
  • NeighbourAlfold, over the Surrey line
How long does it take?

A new consumer unit, fitted in a day

  1. 01
    The first hour

    Protect, isolate, strip out

  2. 02
    Hours two to four

    Fit and terminate the new board

  3. 03
    Hour five

    Test every single circuit

  4. 04
    The final hour

    Energise, label, walk through

Not sure how many ways your board needs?

Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.

Send a photo
Pricing guide

Fixed prices in Alfold Bars

Dual RCD board

6 way, from£425
  • Ideal for 1 to 2 bed flats
  • 10 way from £495
  • Surge protection included
Get a quote

High integrity

12 way, from£575
  • 3 to 4 bed houses
  • Critical circuits isolated
  • Surge protection included
Get a quote
Most popular

Full RCBO board

8 way, from£625
  • 10 to 12 way from £695
  • 14 to 16 way from £795
  • Our recommendation
Book a survey

RCBO + AFDD

10 way, from£1,095
  • 14 way from £1,295
  • HMOs & period terraces
  • Selected circuits from £845
Get a quote
Surge protection retrofit £165 Relocation with a new board add £250 Standalone relocation £395 EICR with any board £99 Standalone EICR £175 to £350

No travel charge to Alfold Bars. Full breakdown on the pricing page.

Alfold Bars questions

Asked in Alfold Bars

Still not sure?

Call for a straight answer from an installer, not a call centre.

Call 0333 360 8691

Yes. Alfold Bars falls within Loxwood parish and Chichester District, so it is inside the Sussex area we cover and the same fixed prices apply, with no travel charge. If you are unsure which side of the line your home falls, your council tax bill will show whether it is Chichester District Council.

Not automatically. Plastic units fitted before the 2016 change were acceptable when installed, and if yours is in good condition with RCD protection it may simply be noted on an inspection report. We would recommend replacing it if it shows heat damage, lacks RCD protection on key circuits, or you are adding major loads. Photos help us give a straight answer.

Clear the area around the fuse box and the meter so we can work safely, and let us know about anything that must stay powered, such as medical equipment or a well stocked freezer. Charge phones and laptops in advance, and shut computers down properly before the power goes off.

Ready when you are

Book your Alfold Bars fuse box replacement

Snap your consumer unit and text the picture to 0333 360 8691, noting whether it is plastic or metal if you know. Your fixed price is worked out from that.

Request a free quote

No obligation, no call out fee. We reply the same day.

Prefer a photo quote? Text a picture of your fuse box to 0333 360 8691.