On the edge of Ashdown Forest

Fuse Box Replacement in Chuck Hatch

Tucked against the edge of Ashdown Forest, Chuck Hatch is a Hartfield parish hamlet a short way south of Hartfield village and north west of Crowborough. Fuse box replacements here are done at a price agreed and fixed in advance. Type 2 surge protection comes with every board, and so does testing of the whole house.

  • Part P registered installers
  • Fitted and certified in a day
  • Surge protection as standard
  • Fixed prices, no surprises
  • 17+ YearsEst. 2009 in Brighton & Hove
  • 6 Year GuaranteeWorkmanship, every board
  • Specialist TeamDirectly employed installers
  • Free QuotationSurvey or photo, no call out fee
  • 2,400+Boards replaced since 2009
What we do in Chuck Hatch

Fuse box services for Chuck Hatch

Full RCBO consumer unit with surge protection, neatly wired and labelled in a Sussex home
Our standard installationFull RCBO board with surge protection
Forest edge homes

Houses tucked in beside the forest

With only a few homes, Chuck Hatch has no typical house, but properties on a forest edge like this share some traits. They are usually detached, often reached down a lane or track, and frequently extended over the years. Their boards tend to carry the marks of that history: mixed brands of breaker, extra boxes and circuits nobody has labelled.

We start by identifying every circuit, then fit a consumer unit sized to the house as it is now, with room to spare. Prices are fixed: £425 upwards for dual RCD, £625 upwards for RCBOs on every way, with surge protection in both.

  • Unlabelled circuits identified
  • Mixed breakers replaced
  • Outbuildings brought into the plan
  • Fixed price before we arrive
Large distribution board being installed with cable tray and busbar, levelled and ready for termination
Specified for Chuck HatchEarthing on forest ground
Earthing on forest ground

Earth rods on light, sandy ground

Around the forest, houses fed by overhead lines frequently take their earth from a rod pushed into the soil instead of from the supply cable. How well a rod works depends on the soil around it, and the heathland of Ashdown Forest sits on light, sandy ground that can dry out in a warm summer, which may push readings up.

On a TT supply, RCDs do the job of disconnecting faults quickly, so they and the rod both matter. We measure the rod, check every RCD trips in time, and record the results. If the rod needs replacing or a second one adding, you get the price first.

  • Rod resistance measured on site
  • RCD trip times recorded
  • Results noted on the certificate
  • Rod work priced before starting
Getting to you

Getting to Chuck Hatch

Our usual route from Brighton to Chuck Hatch is the A26 through Uckfield to Crowborough, then out across the northern side of the forest towards Hartfield. Expect no charge for the journey. Text us some photos and a fixed quote follows; if you suddenly lose all power, phone and we will make every effort to get to you that day.

Chuck Hatch at a glance

  • ParishHartfield
  • CouncilWealden District Council
  • PostcodeTN7
  • Nearest townCrowborough, 4.7 km south east
  • SettingEdge of Ashdown Forest
How long does it take?

A new consumer unit, fitted in a day

  1. 01
    The first hour

    Protect, isolate, strip out

  2. 02
    Hours two to four

    Fit and terminate the new board

  3. 03
    Hour five

    Test every single circuit

  4. 04
    The final hour

    Energise, label, walk through

Not sure how many ways your board needs?

Text a photo of your current fuse box to 0333 360 8691 and we will tell you, with a fixed price, today.

Send a photo
Pricing guide

Fixed prices in Chuck Hatch

Dual RCD board

6 way, from£425
  • Ideal for 1 to 2 bed flats
  • 10 way from £495
  • Surge protection included
Get a quote

High integrity

12 way, from£575
  • 3 to 4 bed houses
  • Critical circuits isolated
  • Surge protection included
Get a quote
Most popular

Full RCBO board

8 way, from£625
  • 10 to 12 way from £695
  • 14 to 16 way from £795
  • Our recommendation
Book a survey

RCBO + AFDD

10 way, from£1,095
  • 14 way from £1,295
  • HMOs & period terraces
  • Selected circuits from £845
Get a quote
Surge protection retrofit £165 Relocation with a new board add £250 Standalone relocation £395 EICR with any board £99 Standalone EICR £175 to £350

No travel charge to Chuck Hatch. Full breakdown on the pricing page.

Chuck Hatch questions

Asked in Chuck Hatch

Still not sure?

Call for a straight answer from an installer, not a call centre.

Call 0333 360 8691

It means your protection relies on RCDs rather than on a low resistance earth provided by the network. Every circuit on the new board is RCD or RCBO protected, and the layout is chosen to suit a TT supply, which can mean a time delayed main RCD. We confirm the arrangement once the rod has been tested.

Earth rod readings change with the weather. Dry ground conducts less well than damp ground, so the same rod can read higher in a dry summer than in winter. A single higher reading is not always a problem; what matters is that it stays within limits the RCDs can work with, which we check.

We switch circuits off one by one and test at sockets, lights and fixed appliances until every way is accounted for. It takes time on an extended house, but it means the new board carries a schedule you can rely on, and any mystery circuit is either explained or made safe.

Ready when you are

Book your Chuck Hatch fuse box replacement

A text message to 0333 360 8691 carrying pictures of your fuse board and electricity meter, plus the earth rod connection if you can track it down, gets you a fixed price for the work at Chuck Hatch.

Request a free quote

No obligation, no call out fee. We reply the same day.

Prefer a photo quote? Text a picture of your fuse box to 0333 360 8691.